LinkClick LuGuang Badge: Pin Placement and Care Tips

By EGG-CELLENT: Discover Your Next Anime Treasure-Anime Figure Egg... | Published: 2026-10-31

Category: Tips & Care

Keep your 66145 LinkClick 75mm LuGuang Badge looking sharp with a simple placement and cleaning routine that protects the pin and your clothes.

Quick answer

Attach the 75mm LuGuang badge to a firm, flat area such as a denim jacket, canvas bag, or fabric display board, and use a locking pin back if you have one. Clean it gently with a soft dry cloth, keep it away from moisture, and store it face-up or in a padded case to prevent scratches.

Why the 75mm size changes placement

At 75mm, the badge is large enough to be a focal point, so placement matters more than with a small lapel pin. A heavy badge on thin or stretchy fabric can pull the material out of shape or sag. Choose a spot with firm backing, such as a denim jacket, canvas tote, or cork display board, rather than lightweight blouses or knits.

Backing care and common mistakes

The catalog does not specify the exact backing type, so check what yours arrives with before you wear it. If it is a butterfly clutch, press it firmly onto the post and test the hold before wearing. If it is a rubber or locking back, make sure it clicks or seats fully. A common mistake is pushing the pin through loosely woven fabric and then pulling the badge by the front to remove it; that bends the post and loosens the backing over time.

Cleaning without damaging the finish

The badge is described as enamel-style, which means the surface can show fingerprints and fine scratches if cleaned aggressively. Avoid abrasive cloths, paper towels, and household cleaners. A soft microfiber cloth is enough for routine cleaning. If the pin gets wet, dry it immediately rather than letting water sit around the rim or backing.

Step-by-step placement and care routine

Choose a firm, flat spot: Pick a location on a denim jacket, canvas bag, or fabric display board where the fabric does not stretch or sag. Hold the badge against the spot before pinning to check that it sits flat and does not hang over an edge. If the fabric moves easily when you press it, choose a sturdier spot.
Pin from the back and secure the backing: Push the post through the fabric from the front, then attach the backing on the inside. Press the backing firmly until it seats fully. Do not twist or force the post, as that can bend it. Test the hold by giving the badge a gentle tug; if it shifts, reseat the backing.
Remove by the backing, not the design: When taking the badge off, support the front with one hand and pull the backing off with the other. Never pull the badge by the printed face, since that puts stress on the post and can scratch the surface. Keep a small dish nearby so the backing does not get lost during removal.
Wipe gently after each wear: Use a dry microfiber cloth to wipe fingerprints and dust from the face. Do not use water, alcohol, or abrasive cleaners. For the backing, a dry cotton swab can remove lint without bending the post. Clean before storing, not just before wearing, to prevent transfer of oils to the display.
Store face-up or in a padded case: Place the badge face-up in a drawer or pin case so the design does not rub against other items. If you use a display board, make sure the pin is fully secured and not resting on a hard surface that could scratch the enamel-style finish. Avoid tossing the badge loose in a bag with keys or coins.

Product facts

66145 LinkClick 75mm LuGuang Badge: The 66145 LinkClick 75mm LuGuang Badge is an enamel-style pin sized at 75mm and designed as a brooch or lapel pin. Its larger size makes it a visible accessory, but also means it needs firm fabric and careful handling to stay flat and secure.
66145 LinkClick 75mm LuGuang Badge