Spy X Family Tip'n'Pop Figure: Setup and Display Guide

Quick answer

Unbox your Spy X Family Tip'n'Pop Loid Forger figure carefully, snap the base onto the figure, then choose a stable, dust-free shelf for display.

Setup steps for your Tip'n'Pop figure

1. 1. Unbox with care: Open the box on a flat surface. Remove the blister pack. Lift the figure by the base, not by the head or arms. Common mistake: pulling the character off the base before releasing the plastic tabs can snap the spring clip.
2. 2. Attach the base: Align the peg on the base with the hole under Loid's feet. Press down gently until you hear a soft click. Do not twist—twisting can strip the peg. If the peg does not slide in easily, check for leftover plastic nubs and trim them with a hobby knife.
3. 3. Test the wobble: Place the figure on a level surface and gently tap the top. The figure should sway slightly and return to center. If it leans to one side, the base is not fully seated. Repeat step 2.
4. 4. Position for display: Set the figure on a shelf or desk away from edges. If you have multiple figures, leave at least 2 inches of space so they don't bump into each other. Use a small acrylic riser if you want to group figures without them touching.
5. 5. Dust protection: Wipe the figure with a soft, dry microfiber cloth once a week. For deeper cleaning, use a can of compressed air. Avoid water or cleaning sprays—they can damage the paint.

About this figure

• 50850 Spy X Family Tip'n'Pop Figure Loid Forger: Tip'n'Pop design offers a playful yet neat display piece, showcasing Loid Forger in his signature attire. The spring base adds motion, so you need a level surface and a dust cover if you want to keep it clean long-term.